Submersible drainage pump STREND PRO DWP-QJ75-224 is suitable for pumping clean water with a temperature below 40 ° C. It is also suitable for pumping other liquids with similar physical and chemical properties as water. The pH of the pumped liquid should be between 6.8-8. The solids content of the water should be less than 0.1% (qualitative fraction) and the diameter less than 0.2 mm. So if you own a well with clean water, do not hesitate and invest in a pump. The pump is suitable for small diameter wells. It is most often used in areas with low water levels, where high discharge and a large distance to the sampling point are required. The immersion depth of the pump must not exceed 40 meters and the distance from the bottom should be greater than 50 cm.

The single-phase capacitor-operated pump motor is equipped with an external capacitor and an overcurrent fuse in the starting regulator, which can automatically cut off the power supply when the motor is overloaded. The motor has an output of 750 W. The cable with which you connect the pump to the 230 V power supply for proper working is 20 m long. The maximum flow that the pump offers is 63 l / min. The pump provides a maximum discharge of 85 m. The operating pressure suitable for this pump is a maximum of 4 bar. The pump is equipped with degree of protection IP68 and insulation class B. The starter has thermal protection for safe motor operation.